|
Input Section |
Applicable Detectors
(option) |
-
IP-292 Ignition pulse detector (For primary side cable of ignition coil)
-
IP-296 Ignition pulse detector (For secondary side cable of ignition coil)
-
IP-3000A Ignition pulse detector (Low sensitivity type)
-
OM-1500/1200 Motor/gasoline engine RPM detector(Electro-magnetic type)
-
VP-202 Gasoline/diesel engine detector (Low sensitivity type)
-
VP-1220 Gasoline/diesel engine detector (High sensitivity type)
-
LG-916 (TTL signal input) Photoelectric reflection type detector
|
|
Applicable Engines |
Gasoline Engine
2-cycle (1 to 4 cylinders)
4-cycle (1 to 6, 8, 10, 12 cylinders) |
|
Measurement Ranges |
|
■ 2-cycle |
|
1, 2 cylinders : |
500 to 20,000 r/min |
|
3 cylinders : |
500 to 16,000 r/min |
|
4 cylinders : |
500 to 12,000 r/min |
|
■ 4-cycle |
|
1 to 5 cylinders : |
500 to 20,000 r/min |
|
6 cylinders : |
500 to 16,000 r/min |
|
8 cylinders : |
500 to 12,000 r/min |
|
10 cylinders : |
500 to 10,000 r/min |
|
12 cylinders : |
500 to 8,000 r/min |
|
|
Input Connectors |
Sensor input: BNC connector
TTL input: 6-pin connector (R03RB6F, externally-supplied power supply; 12 V 100 mA) |
|
Input Gain Selector |
x1, x5, x10, x20, selectable |
|
Display Section |
Display |
100-mm wide-angle meter, Class 1.5 |
|
Meter Scale (Double scale) |
0 to 10,000 r/min or 0 to 20,000 r/min
Scale printed in monochrome |
Analog Output
Section |
Output Voltage |
0 to 10 V
(In proportion to 0 to 10,000 r/min or 0 to 20,000 r/min) |
|
Output Voltage Setting Accuracy |
Zero; ±0.2%/FS (25°C)
Span; ±0.3%/FS(25°C) |
|
Linearity |
±0.2%/FS at most |
|
Ripple |
250 mVp-p or less (at 500 r/min) |
|
Output Impedance |
1 Ω or less (25°C) |
|
Response |
Approx. 20 ms |
|
Load Resistance |
At least 10 kΩ |
|
Output Connector |
R03-RB3F |
Pulse Output
Section |
Output Waveform |
Rectangular waveform
Pulse width; Approx. 2 ms
Output as 1 pulse/2 revolutions (1 pulse /revolution available as an option) |
|
Output Voltage |
Hi level; At least 4.5 V
Lo level; Up to 0.5 V |
|
Load Resistance |
At least 50 kΩ |
|
Output Connector |
R03-RB3F |
|
General Specifications |
Power Supply |
12 V to 24 VDC |
|
Current Consumption |
Approx. 500 mA (at 12 VDC) |
|
Operating Temperature Range |
0 to 40 °C |
|
Storage Temperature Range |
-10 to 60 °C |
|
Operating Humidity Range |
80 % RH max. (non-condensing) |
|
Storage Humidity Range |
80 % RH max. (non-condensing) |
|
Weight |
Approx. 1.3 kg |
|
External dimensions |
221 (W) x 116 (H) x 150 (D) mm |
|
Accessories |
・Analog output cable (1.9m)
・Pulse output cable (1.9m)
・Power cable (3.4m) |