Thư viện video

Các khuôn mẫu

15/06/2017
3.372 lượt xem

video thiết bị tự động hóa

TIN TỨC NỔI BẬT

Hướng dẫn sử dụng máy đo tọa độ

16/06/2017

Vai trò của thiết bị đo lường

16/06/2017

Công ty Tâm Chí tuyển dụng nhân sự

16/06/2017

chia sẻ

Linear Gauge Sensors Onosoki GS-4713A, GS-4730A, GS-4813A, GS-4830A, GS-5050A, GS-5100A, GS-5051A, GS-5101A, GS-3813B, GS-3830B

Ngày đăng: 09/31/2021 - 505 lượt xem

Giá: Liên hệ

Xuất xứ:
Tình trạng:
Model:
Bảo hành:

Số lượng:

Mua hàng

Hotline:

Hotline: 0365930441

Mô tả sản phẩm
Thông số kỹ thuật
Chi tiết dòng sản phẩm
Tài liệu kỹ thuật

Specifications

Model name Item	GS-4713A	GS-4730A	GS-4813A	GS-4830A
Measurement range	13 mm	30 mm	13 mm	30 mm
Resolution	10 μm		1 μm
Accuracy (at 20 °C)	3 μm	3 μm	2 μm	3 μm
Maximum spindle velocity^*1	1(4) m/s		0.3(1.2) m/s
Measurement force(downward)^*2	1.8 N or less	2.4 N or less	1.8 N or less	2.4 N or less
Number of sliding times (proven in our endurance test)	15 million times or more
Protection class (not including connector part)	IP66G
Stem diameter	Ø15 mm^+0-0.009
Power supply	4.5 to 5.5 VDC
Power consumption (5 VDC)	120 mA or less
Signal output (5 VDC)	Two-phase square wave, phase difference: 90° ±20° Output voltage Hi:4.5 V or more / Lo:0.4 V or less
Output impedance	Approx. 22 Ω
Vibration resistance (when the power is off)^*3	196 m/s in each of the three axial directions (75 minutes per each), 10 cycles of 10 Hz to150 Hz sweeping
Shock resistance (when the power is off)^*3	1960 m/s² in each direction for each of three axes, three times for each of ±X,Y and Z directions, sine half-wave, pulse duration 6 ms
Operating temperature range	0 to +40 °C
Storage temperature range	-10 to +55 °C
Cable length	Approx. 4.9 m
Weight (including cable, connector)	Approx. 325 g	Approx. 385 g	Approx. 325 g	Approx. 385 g
Accessories	Instruction manual, spanner

*1. When used with Ono Sokki's Gauge Counter. The values within parentheses () is the maximum spindle velocity used with the DG-4140/DG-4190/DG-5100/DG-3000.
*2. An attachment may not return completely if it is facing upwards.
*3. Vibration/shock resistance values described in above are not guaranteed during measurement operation.
• Disconnected or modified signal cable is not applicable to CE marking
NOTE:Please check an attaching portion (material, grounding etc.) before you install the New GS series. If the New GS series is installed in a metallic portion that is not grounded, it might cause blowout of a fuse or cable damage because of a potential difference that might be produced between a counter side chassis and a sensor side chassis.

List of Signal cable / accessory

Long stroke type

GS-5050A/5100A

10 µm resolution

GS-5051A/5101A

1 µm resolution

Long Stroke type

• Ball bearing is used.
• New models of resolution at 100 mm and resolution at 1 μm are added to line up.
• The pitch of mounting hole and the distance from tip of spindle after installation are same as those of the GS-5011.

Specifications

Model name Item	GS-5050A	GS-5100A	GS-5051A	GS-5101A
Measurement range	50 mm	100 mm	50 mm	100 mm
Resolution	10 μm		1 μm
Accuracy (at 20 °C)	10 μm	12 μm	4 μm	5 μm
Maximum spindle velocity^*1	1(4) m/s		0.3(1.2) m/s
Measurement force(downward)^*2	3 N or less	5.5 N less	3 N or less	5.5 N or less
Number of sliding times (proven in our endurance test)	15 million times
Protection class (not including connector part)	IP5X
Stem diameter	Ø15 mm^+0-0.009
Power supply	4.5 to 5.5 VDC
Power consumption (5 VDC)	120 mA or less
Signal output (5 VDC)	Two-phase square wave, phase difference: 90° ±20° Output voltage Hi:4.5 V or more / Lo:0.4 V or less
Output impedance	Approx. 22 Ω
Vibration resistance (when the power is off)^*3	147 m/s² in each of the three axial directions (75 minutes per each), 10 cycles of 10 Hz to150 Hz sweeping
Shock resistance (when the power is off)^*3	1470 m/s² in each of direction for each of three axes, three times for each of ±X,Y and Z directions, sine half-wave, pulse duration 6 ms
Operating temperature range	0 to +40 °C
Storage temperature range	-10 to +55 °C
Cable length	Approx. 4.9 m
Weight (including cable, connector)	Approx. 570 g	Approx. 655 g	Approx. 570 g	Approx. 655 g
Accessories	Instruction manual, spanner

*1. When used with Ono Sokki's Gauge Counter. The values within parentheses () are the maximum spindle velocity used with the DG-4140/DG-4190/DG-5100/DG-3000.
*2. An attachment may not return completely if it is facing upwards.
*3. Vibration/shock resistance values described in above are not guaranteed during measurement operation.
• Disconnected or modified signal cable is not applicable to CE marking.

NOTE:Please check an attaching portion (material, grounding etc.) before you install the New GS series. If the New GS series is installed in a metallic portion that is not grounded, it might cause blowout of a fuse or cable damage because of a potential difference that might be produced between a counter side chassis and a sensor side chassis.

List of Signal cable / accessory

High resolution type

GS-3813B/3830B

0.1 µm resolution

• DG-5100
Digital Gauge Counter for GS-3800 series (click)

The number of sliding times: 5 million →15 million

Protection class: IP64 → IP66G

Vibration resistance: 98 m/s² →196 m/s²
Shock resistance: 980 m/s² →1960 m/s²

Achieves more accurate measurement compared with an existing model.
Three times of bearing life compared with an existing model.
Dust-proof, water-proof and oil-proof performances are superior to an existing model.
Vibration/shock resistant performances are doubled compared with an existing model.
High resolution type (Vibration resistance structure, dust-proof, water-proof and oil-proof IP66G)
Ball spline bearing and development of new optical system achieve both of high resolution and environment resistance.
Detected signal can be obtained as square wave (line driver output) to connect PLC directly.

Specifications

Model name Item	GS-3813B	GS-3830B
Measurement range	13 mm	30 mm
Applicable counter	DG-5100
Resolution	0.1 μm
Accuracy (at 20 °C)	1 μm
Maximum spindle velocity^*1	300 mm/s (1.2 m/s)
Measurement force(downward)^*2	2.3 N or less	2.7 N or less
Number of sliding times (proven in our endurance test.)	15 million times or more
Protection class(not including connector part)	IP66G
Stem diameter	φ15 mm^{+0 -0.009}
Power supply	4.5 to 5.5 VDC
Power consumption (5 VDC)	150 mA or less
Signal output (5 VDC)	90 degree phase-differential square wave Applicable to RS422A Line driver output(equivalent to 26C31)
Vibration resistance (when the power is off)^*3	196 m/s² in each of the three axial directions(75 minutes per each), 10 cycles of 10 Hz to150 Hz sweeping
Shock resistance (when the power is off)^*3	1960 m/s² in each of the three axial directions. Three times each in the ±X,Y,Z directions, sine half-wave, pulse duration 6 ms
Operating temperature range	0 to +40 °C
Storage temperature range	-10 to +55 °C
Cable length	Approx. 5 m
Weight (including cable, connector)	Approx. 350 g	Approx. 420 g
Accessories	Instruction manual, spanner

*1. When used with Ono Sokki’s Gauge Counter. The values within parentheses () are the maximum spindle velocity used with the DG-5100.
*2. An attachment may not return completely if it is facing laterally or upwards.
*3. Vibration/shock resistance values described in above are not guaranteed during measurement operation.
• Disconnected or modified signal cable is not applicable to CE marking.
NOTE:Please check an attaching portion (material, grounding etc.) before you install the New GS series. If the New GS series is installed in a metallic portion that is not grounded, it might cause blowout of a fuse or cable damage because of a potential difference that might be produced between a counter side chassis and a sensor side chassis.

Linear Gauge Sensors Onosoki GS-4713A, GS-4730A, GS-4813A, GS-4830A, GS-5050A, GS-5100A, GS-5051A, GS-5101A, GS-3813B, GS-3830B

Mô tả sản phẩm

Thông số kỹ thuật

Chi tiết dòng sản phẩm

Tài liệu kỹ thuật

Các sản phẩm khác

Linear Gauge Sensors Onosoki GS-6713A, GS-6730A, GS-6813A, GS-6830A

Linear Gauge Sensors Onosoki GS-1713A, GS-1730A, GS-1813A, GS-1830A

Ono sokki Elevator Speedometer EC-2100