Shimpo's innovative TNX torque testing machine has been devised for semi-automatically measure opening torques of caps, lids, and screws of various containers, such as cosmetics, medical products, and beverages, as well as the tightening force of valves. Shimpo TNX Series is compatible with the various type of caps including the P.P. caps. It adopts versatile USB as its interface which makes data import easy through communication with PCs.
Shimpo Motorized Torque Testing Unit TNX Series when combined with + DSP-10 stand, could be used as a destructive tester to identify if there is any material weakness of the packaging during the screwing of cap process. Furthermore, Shimpo TNX Series can also store 1000 sets of opening 1st, 2nd, 3rd peak values, and fitting peak value in memory, before you transfer it to a USB memory device. The specialized software called "Digitorq_TNX" was created to edit measurement data easily. Furthermore, it can perform motorized torque tests by combining with the DSP-10 (motorized torque stand). The lower torque limit is considered as the minimum pressure of the cap to avoid any leak of the product. For better result, the Shimpo's TNX Series + DSP-10 torque tester needs to be combined with a leak test with a secure seal analyzer. The higher torque limit is the maximum torque the customer can apply to open or close the product's cap.
Your investment on Shimpo Motorized Torque Testing Unit TNX Series will allow you to work on appropriate sampling checks in production line because motorizing manual opening torque tests eliminates the variation of measurement torques generated by human error. Depending on the production process, it could be necessary to control the opening torque, 24hours after the packaging process. Temperature variations can also modify the product characteristic as a result of different torque measurement. Furthermore, an optional rotation angle and speed of the rotation axis for opening torque tests can also be set.
Shimpo Motorized Torque Testing Unit DSP-5E Features:
-
Fast action test on both upper cap and lower bottles' body of 0.5 / 2/5/10 Newton · m
-
The Measuring range: 0-10 Nm
-
Chuck range: φ10～φ190mm
-
Accuracy : ±0.5%/F.S.
-
Display unit : Nm , kg.cn , lb.in
-
Memory data : 1000data(max)
-
Satistic process: Average value, Max value, Min value
-
Data output: USB 1.1
-
Pass / fail judgment of measured value is possible by setting upper limit value and lower limit value.
-
The judgment result is notified by 3 Judgment LEDs (HI, GO, LO)
-
Display cycle can be switched to 1, 2, 4, 8 (times / sec).
-
Adoption of nickel hydride battery and It can be used without AC adapter by adopting nickel hydrogen battery.
-
Unit switching display function of N · m, N · cm unit switching display is possible. TNX - 0.5 is switched from mN · m, N · cm.
-
PC software: download the memory data by PC software (Digitorq_TNP).
-
Available to transfer 1,000 data to USB memory.
-
Correspond to motorized torque By combining TNX and DSP-10
TECHNICAL SPECIFICATION
Shimpo Torque Testing Unit TNX Series Dimension Guide:
