Máy khử ion Kasuga Nozzle type static eliminator NIH-22/NIH-22K

Ngày đăng: 22/36/2020 - 576 lượt xem

Giá: Liên hệ

Số lượng:

Mua hàng

Hotline:

Hotline: 0365930441

A high-voltage power supply is embedded in the nozzle electrode. This increases safety and permits installation in a range of locations because high-voltage cables are not exposed.
Use of the uniquely developed spinning nozzle for the head enables high-efficiency static and dust elimination. (NIH-22K)
Compressor air drives the spinning nozzle, which allows low-cost, high-efficiency static and dust elimination because a separate power supply is not needed. (NIH-22K)
The unit efficiently eliminates dust that cannot be removed completely with conventional units that use straight air. (NIH-22K)

Model	NIH-22	NIH-22K
Ion generation method	High-frequency corona discharge method
Discharging electrode needle	Stainless
Recommended air pressure	0.2 - 0.4MPa
Amount of air consumption	190 - 350L/min
Spinning nozzle	No	Yes
Amount of ozone production	0.02 ppm or less(150mm)
Operating environment	Temperature: 0°C-40°C, Humidity: 80% RH or below (no condensation)
Input condition	AC100-240V, 50/60 Hz (with AC adapter)
Power consumption	Approx. 2.5VA(DC12V)
Mass	Approx. 300 g (including AC adapter)