Máy đo từ tính EMIC Multifunctional Fluxmeter FM-2000

Ngày đăng: 23/53/2024 - 68 lượt xem

Giá: Liên hệ

Xuất xứ:
Tình trạng:
Model:
Bảo hành:

Số lượng:

Mua hàng

Hotline:

Hotline: 0365930441

Mô tả sản phẩm
Thông số kỹ thuật
Chi tiết dòng sản phẩm
Tài liệu kỹ thuật

Outline

This is a magnetic flux meter with a CR integrating circuit using a high-gain IC amplifier.

The comparator function can display Hi, Go, and Lo signals,

Automatic measurement can be performed by external control of DRIFT/MEAS and RESET.

Features

Three types of measurement modes are provided as standard.

Measurement operation can be controlled and automated by control input.

RS-232C is standard, enabling measurement data management on a PC.

Wide input power supply range of 100 to 240 VAC can be used without switching.

Specifications

Measuring range	0.1mWb, 1mWb, 10mWb (when MILLI WEBER TURNS FULL SCALE 001.0 setting)
Display range	0.1μWb to 9.999Wb/F.S. Turns
Measurement mode	Normal, Peak hold, Peak to peak hold
Measurement accuracy	±1%/F.S.±1digit (when MILLI WEBER TURNS FULL SCALE 001.0 or higher is set)
Drift performance	MULTIPLIER 0.1:±1%/F.S.(30SEC) 1.0:±1%/F.S.(60SEC) 10:±1%/F.S.(60SEC) (Time until indication changes ±1% with flux change in F.S.) (when MILLI WEBER TURNS FULL SCALE 001.0 or higher)
Hold Time	MULTIPLIER 0.1: ±1%/F.S.(30SEC) 1.0: ±1%/F.S.(60SEC) 10: ±1%/F.S.(60SEC) (Time until indication changes ±1% with flux change in F.S.) (when MILLI WEBER TURNS FULL SCALE 001.0 or higher)
Output terminal	DC±1V/F.S. (1.0V when digital display is 1.000)
Comparator function	1) Judgment input Upper/lower limit setting including polarity +1999 to 0 to -1999 2) Judgment operation Approx. 2 times/sec 3) Judgment display ・Hi(Red LED): Upper limit setting value, indicated value & nbsp; ・Go(Green LED) : Upper limit set value ≥ Indicated value ≥ Lower limit set value & nbsp; ・Lo(Yellow LED) : Indicated value<Lower limit set value 4) Judgment output Hi/Go/Lo Isolated type open collector output & nbsp; ・Sink current 20mA Max (30V or less) & nbsp; ・Output saturation voltage 1.2V Max at 20mA
External control input	Photocoupler isolated input ; ・Measurement start input ; ・Reset input
RS-232C communication speed	9,600bps
Power source	Single phase AC100 to 240V 50/60Hz
Specification temperature range	5 to 40°C
Dimensions (mm), weight	266W (including handle) x 116H x (370)D approx. 3.6kg