General Information:
■Electronic testing device with digital display for tensile and compressive force measurements
■Easy to use and space-saving, made for the use in production and test laboratories, suitable for the tensile force measurement of ready-made supply cables with flat plugs, end sleeves and other pressed, crimped soldered, welded glued or comparably connected parts
■Compressive force measurement, for example insertion and extraction tests.
■Indication Range: 0-500N, measurement resolution of 0.5N.
■High measurement accuracy and reproducibility of measurement
■Readout and operation via resistant touchscreen with dot matrix-LCD-Display.
■Casing protected against dust.
■High measurement frequency.
■Automatic zero point alignment.
■Tare-compensation.
■Overload indicator.
■2 operating modes:Peak-mode, displaying the highest measured force value of the entire measurement procedureTracking-mode, displaying thecurrent force value
■Setup menu for adjustment.
■Serial interface for measured value output.
■Loading system with parallel guided load slide; actuation via laterally mounted hand-lever, adjustable in inclination; load slide with guide railand possiblelength adjustment.
■Durable, maintenance-free metal construction.
■Universal quick-change tool holders
Technical Data CT 50:
Model Designation:CT 50
Indication range:0-500 N.
Measurement resolution:0,5 N
Relative deviation in measuring area:≤± 0.5 % of value ± 1 digit
Casing:
Dimensions: Baseplate:W×D×H ca. 130×400×125 mm;
Controls:W×D×H ca. 125×105×70 mm;
Hand lever:240 mm, adjustable inclination
Weight:around 8 kg.
Material: Anodized aluminum
Color:Silver-grey
Measuring System:Supply Voltage:12 V DC via an external power supply.
Force Transducer: Strain gauge -load cells with integrated 12 bit AD-converter and RS485 bus. Overload protection.
Evaluation:
Operating modes: Tracking-mode and peak-mode;
Measurement frequency: 10000 Hz; Zero point correction; Tare-compensation;
Overload indicator;
Setup menu for instrument adjustment;
Individual output of measured values via serial interface.
Display:
Backlight LCD-dot matrix-display,128x64p, 56,3x38,4 mm.LCD update rate: 5 Hz.
Input/HandlingAll
inputs and actuations made via infrared-touchscreen.
Interface:
RS232C1200 baud, 8 data bits, 1 stop bit,Parity: none;Connector: RJ45 socket (8-pin).