Máy Đo Độ Dày nhiều lớp phủ Coattest DJH-E Coulometric Coating Thickness Measurement

Ngày đăng: 13/48/2023 - 244 lượt xem

Giá: Liên hệ
  • Xuất xứ:
  • Tình trạng:
  • Model:
  • Bảo hành:
Số lượng:

Hotline:

Hotline: 0365930441
Characteristics and technical parameters of DJH-E
Plating single layers multilayer alloy STEP
e.g. Cr,Ni,Cu,Zn,Sn,Ag,Au,Cd,Co,Pb e.g. Cr/Ni/Cu e.g. NiP,ZnNi,SnZn,SnPb /
Substrate metallic non-metallic
e.g. steel, copper and its alloy, aluminium, die-casting zinc e.g. plastic(ABS), ceramics
Range 0.03~300μm
best thickness range: 0.0350um, over 50um, the error will gradually increase
Resolution 0.01um
Reproducibility 5%
Indication Error 10%
Potential Range 0~3000mv
Potential Accuracy 0.01mv
Gasket Standard: φ2.4, φ1.7 (mm)
choose: φ1.2, φ1.0, φ0.8 (mm)
Wire Test STD-W wire test stand should be purchased separately
Test Stand standard: STD07 Test Stand
choose: STD16 Test Stand, STD19 Test Stand, STD-W Test Stand
Calibration the thickness can be calibrated by the calibration plate
Printer embedded thermal printer
Print Contents plating type,thickness,average,maximum,minimum,standard deviation,coefficient of variation,date
Display 126 * 64 dot matrix LCD
Data Storage /
Shortcut Key four shortcut key for single or multi layer coating / substrate combination selection
Cell Voltage display with thickness value
Suspend Test for thick coatings, the test can be stopped at any time,
and can be continued after changing the electrolyte
Version Ver 2.0
Power AC 220V~
Size 220*195*120(mm)
 
 
 
 
 
 
 
 
 
Plating single layers multilayer alloy STEP
e.g. Cr,Ni,Cu,Zn,Sn,Ag,Au,Cd,Co,Pb e.g. Cr/Ni/Cu e.g. NiP,ZnNi,SnZn,SnPb layer thickness and potential differences
Substrate metallic non-metallic
e.g. steel, copper and its alloy, aluminium, die-casting zinc e.g. plastic(ABS), ceramics, NdFeB
Range 0.03~300μm
best thickness range: 0.0350um, over 50um, the error will gradually increase
Resolution 0.01um
Reproducibility
Computer need to be purchased separately
5%
Indication Error 10%
Potential Range 0~3000mv
Potential Accuracy 0.01mv
Gasket Standard: φ2.4, φ1.7 (mm)
choose: φ1.2, φ1.0, φ0.8 (mm)
Wire Test STD-W wire test stand should be purchased separately
Test Stand standard: STD19 Test Stand
choose: STD07 Test Stand, STD16 Test Stand, STD-W Test Stand
Calibration the thickness can be calibrated by the calibration plate
Thickness Identification automatic termination
Operation Mode use for STEP or common test: connect tester and computer with USB cable
use only for common test: directly with the tester
Print use for computer: laser or inkjet printer, Excel format
use for stand-alone(without computer): embedded thermal printer
Print Contents plating type,thickness,average,maximum,minimum,standard deviation,coefficient of variation,date;
layer thickness and potential differences curves
Display use for computercomputer’s screen
use for stand-alone126 * 64 dot matrix LCD
Data Storage data kept in computer database
Shortcut Key use for stand-alone (without computer), four shortcut key for single or multi layer coating / substrate
combination selection
Curve Analysis analysis the differences in potential and the layer thicknesses of multiple nickel coatings simultaneously
Suspend Test for thick coatings, the test can be stopped at any time,
and can be continued after changing the electrolyte
Data search Provide a variety of query methods
Computer OS Windows XP, win7, win10
Version Ver 2.0
Power AC 220V~
Size 200*255*161(mm)