Máy đo độ cứng cao su ASKER Micro durometer MD-1 capa

Measurement time

About a minimum of 3 seconds for one automatic measurement cycle.

Measurement objects

Capable of measuring the hardness of small rubber parts including those for automobiles, electronic circuits, office machines in the product shape instead of conventionally used test pieces. Selection of three modes, [PEAK HOLD], [TIMER HOLD], or [NORMAL] as standard.

The timer may be set by the second to a maximum of 15 seconds.

Accessories

Connectable to PC via Ethernet or RS-232C interface.

Equipped with application software for measurement.

Type

Type A for general rubbers and Type C for soft rubbers

Operation buttons

• MEASURE···To start testing actions
• PRINT···To print out measurement results
• RESET···To set the sensor and indicator return to original status
• AUTO···To automatically print/reset switching
• MODE···To select measurement mode from "Peak hold", "Timer-hold", and "Normal."

Application software for measurement　*Included with shipment

• Starting and finishingf measurement
• Measurement of peak value and timer-hold value
• Measurement of the decrement of hardness values (every 100msec)
• Data may be easily exported to Excel.
• Data saved in csv format.

*Some technical information including the means by which the program can communicate shall be released.

*No PC is included with shipment (A connection cable is included).

O-ring jig

Four types of V-block for O-ring measurement are included with shipment:

[Measurable wire diameters]

• Φ0.8 - 2.0mm
• Φ1.2 - 3.0mm
• Φ1.6 - 4.0mm
• Φ2.0 - 5.0mm