Ngày đăng: 01/45/2023 - 138 lượt xem
Hotline:
Height: 2.54mm Shape: Flat Cone Point
The Pressure foot in contact with the specimen is 44mm in width and 18mm in depth, wide enough to ensure accurate measurement. The Longer Pressure Foot Type (JAL type)is applicable for measurement of narrow or concave specimens.
Our product line consists of various types of durometers applicable to specific materials as indicated in the chart above. Type A Durometer (ASKER A type), conforming to JIS K 6253-3 is the most popular type of durometer for measuring rubber hardness. However, verification is recommended because a significant difference is estimated to be the largest when a durometer indicates measurement values from 10 to 90 points. For hard specimens for which Type A Durometer readings indicate more than 90 points, measurements should be undertaken using the Type D Durometer (ASKER D type). However, for soft specimens with measurements of less than 20 points, the ASKER C type or Type E Durometer (ASKER E type) should be used. The most important consideration in using durometers is to select the correct type for purposes of measurement according to the specimen.
A custom designed pressure foot durometer is available according to specimen conditions.