Ngày đăng: 01/42/2023 - 136 lượt xem
Hotline:
Height: 2.54mm Shape: Cylindrical
A 50mm diameter pressure foot in contact with a specimen, is wide enough to offer stable measurement.
Our product line consists of various types of durometers applicable to specific materials as indicated in the chart above. Type A Durometer (ASKER A type), conforming to JIS K 6253-3 is the most popular type of durometer for measuring rubber hardness. However, verification is recommended because a significant difference is estimated to be the largest when a durometer indicates measurement values from 10 to 90 points. For hard specimens for which Type A Durometer readings indicate more than 90 points, measurements should be undertaken using the Type D Durometer (ASKER D type). However, for soft specimens with measurements of less than 20 points, the ASKER C type or Type E Durometer (ASKER E type) should be used. The most important consideration in using durometers is to select the correct type for purposes of measurement according to the specimen.
The stationary set hand (max-hand) makes the maximum value easier to read and allows the creep characteristics of a specimen. Accurate measurement is made possible for specimens* for which stress relaxation occurs over time or for specimens for which it is difficult to take readings from the front. *Materials for which the reading decreases immediately after the indentor has been pressed against the surface.