|
Measurement range |
|
Applicable Rotors |
Rigid Rotor, Grinding wheel(G:1-plane, GW:2-plane) |
|
Balancing Speed |
60min-1 to 61,000min-1 |
|
Resolution of rotational speed display |
1 min-1 |
|
Amplitude range of synchronized vibration |
0.001 to 999 µm(at 6,000min-1) |
|
Resolution of vibration |
0.001µm |
|
Vibration input channel |
2ch |
|
Measuring method |
Fixed-speed method |
|
No. of Correction plane |
1 or 2, selectable |
|
Correction method |
|
Polar coordinates |
1° to 360° (angle resolution: 1°) |
|
Components of unbalance vector |
3 to 50 |
|
Correction weight |
Add / Remove |
|
Vibration analysis function |
|
Unbalance Vibration Analysis |
0.001 to 999µm (at 6,000min-1) |
|
Harmonic analysis |
0.001 to 999µm (at 6,000min-1) |
|
FFT Analysis (Optional) |
Maximum analysis frequency: 20kHz |
|
Overall amplitude monitoring |
Acc P、Acc RMS、Acc F、Vel R、Disp EQP (range Acc: 0.1 to 40m/s²) |
|
Time domain Waveform (Optional) |
800 lines max. |
|
Others |
|
USB memory port |
Available as standard |
|
USB interface |
USB mini connector (transfer to PC for data and Screenshots) |
|
microSD card slot |
N/A |
|
Eccentricity compensation |
Available as standard |
|
Measuring range selection |
Automatic ranging |
|
No. of stored work data |
10 |
|
Graphic display |
5.7" TFT color LCD (LED back light) |
|
Set up operation |
Dialog with touch screen |
|
Power supply |
AC adapter: AC 100 to 240V ±10% 50/60Hz |
|
Environment |
Temperature: 10 to 40°C, Humidity: 20 to 80％RH (Non-condensing) |
|
Dimension of measuring unit |
204(W) × 71(D) × 137(H)mm, (105(L)mm for printer option) |
|
Mass of measuring unit |
Approx. 1.7kg, (2.2kg for printer option) |
|
Dimension of Carrying case |
455(W) × 185(D) × 320(H)mm |
|
Mass of Carrying case |
Approx. 8.0kg (with main unit and all accessories) |
|
Standard accessories |
|
Vibration sensor |
P12SC Sensitivity: 10pC/(m/s²)
fixing magnet: KM-025C (Holding force: 100N)
sensor cable: LN-041 (2.5m straight) |
|
Low-speed Displacement Sensor |
V10L Sensitivity: 0.5mv/µm Note:Vibration sensors for RL, RLB (type V10L) can be used only for low speed balancing. The sensors cannot be used for general vibration measurement purpose other than balancing.
fixing magnet: MB-B (Holding force: 800N)
sensor cable: 2.5m |
|
Rotation sensor |
SFS-M1H (with 2m cable)
fixing magnet stand: DG1030 (Holding force: 800N)
with manual and an adjust driver |
|
AC adapter |
UN318-0628 (DC6V 2.8A) |
|
Circular protractor |
822-0001 (ø15cm) |
|
Manual |
CD-ROM, Digest booklet |
|
Optional |
|
FFT Analyzer (-F) |
Frequency analysis / Time domain Waveform |
|
Unbalance correction |
Balance weights arrangement for grinding wheel (7006RLG: 1-plane, 7006RLGW: 2-plane) |
|
Vibration input channel |
N/A |
|
Internal Printer(-P) |
Mechanical dot printer |
|
Additional sensor for multi-point measurement |
Vibration sensor:P12SC with cable:LN-041(2.5m) |