Máy cắt siêu âm Ultrasonic Cutter model: HSQ40B-AB

Ngày đăng: 30/07/2020 - 1.624 lượt xem

Giá: Liên hệ

Xuất xứ:
Tình trạng:
Model:
Bảo hành:

Số lượng:

Mua hàng

Hotline:

Hotline: 0365930441

Mô tả sản phẩm
Thông số kỹ thuật
Chi tiết dòng sản phẩm
Tài liệu kỹ thuật

Description:
Ultrasonic Cutters are designed to cut textiles thermoplastic films, rubber woven and non-woven fabrics. Ultrasonic Cutting Systems can be operated as hand-held units or incorporated into automated machinery Solid, one-piece construction of horn blade virtually eliminates breakage and energy loss. Minimal blade flexure yields straighter cuts without having to support the blade. Available in 20, 30 or 40 kHz frequencies.
Ultrasonic Cutting Machine is a class of device using ultrasonic energy for cutting. Instead of using traditional blade cutting, ultrasonic cutting has its advantages of smooth, reliable cutting, accurate trimming, no deformation, no raising, fuzzing, spinning,wrinkling etc. It can avoid the rough cutting-edge, coked edge, fuzzballs and other shortcomings of laser cutting machine.
The much higher vibration does not allow any product to stick to the blade. The cut is clean and without pressure on the product.
Specification:

Model	HSQ40B-AB
Frequency	40KHZ
Output Power	100W
Generator	Analog generator, 155 x 265 x 170mm
Handle	Φ32×170
Size of cutter	Blade replaceable
Length of cable	3M
Outer skin	Aluminum
Weight	8KG
Voltage	220V / 110V
Accessory	Foot switch1pc; Cut blade 25pcs; 1.5mm special hex wrench 1pc; Screw M3×4L 2pcs
Material of cutter	titanium alloy, stainless steel

40K ultrasonic multi-function handheld cutter applies to:
● Natural fibers
● Synthetic fiber
● Thin plastic products（Such as plastic film, cell phone case）
● All types of paper, bottom film
● Rubber, silicone
● Repair of printed circuit board copper foil
● ABS、PP、PE … other organic plastic sheet less than 2mm
● Various types of synthetic fabrics
The device features:
Cut fast, accurate, smooth edge of materials
The following table presents the company tests for different material thickness, the recommended cutting speed data.

Cutting Material	Thickness	Cutting speed
ABS/PE	2mm	4mm/s
	3mm	2mm/s
	4mm	1mm/s
PVC	2mm	15mm/s
Asian gram force	2mm	3mm/s
Non-woven fabric	3mm	2mm/s
Chloroprene rubber	5mm	Easy to cut
Corrugated paper	8mm	Easy to cut
Plywood	2.5mm	Easy to cut
Glass fiber resin	1.5mm	Easy to cut
Thick cardboard	1.5mm	Easy to cut
Linen	2mm	Easy to cut
Urethane	3mm	Easy to cut
Nylon/PP	3mm	Easy to cut

Máy cắt siêu âm Ultrasonic Cutter model: HSQ40B-AB

Mô tả sản phẩm

Thông số kỹ thuật

Chi tiết dòng sản phẩm

Tài liệu kỹ thuật

Các sản phẩm khác

Bộ kẹp lưỡi dao Blade Anchor Honda ZH04S

Cán kẹp lưỡi dao Blade Anchor Honda ZH04

Lưới cắt cho máy cắt siêu âm Honda ZO 91, HA04