chia sẻ

Load stand Attonic K-502E, Attonic Ｋ-502H, Attonic K-503E

Ngày đăng: 24/04/2020 - 610 lượt xem

Giá: Liên hệ

Xuất xứ:
Tình trạng:
Model:
Bảo hành:

Số lượng:

Mua hàng

Hotline:

Hotline: 0365930441

Mô tả sản phẩm
Thông số kỹ thuật
Chi tiết dòng sản phẩm
Tài liệu kỹ thuật

Ｋ-50２H(manual vertical load measuring stand)

- It is a load stand that can be measured up to 2KN(200kgf) for the measurement that is pushed and pulled.

- Combining acceptable model
・MPL series(1KN/2KN)、ARF series(100-200)

Catalog of K-502 series

Main body externals dimensional drawing

Standard issue
Model	K-502H
Size mm(length)	722mm
Weight	About 65ｋｇ
Maximum load capacity	2KN
The maximum stroke	150ｍｍ
Sending pitch	0.5ｍｍ/1rev.

To the head of this page

K-502E(electric vertical load measuring stand)

- It is a load stand that can be measured up to 2KN(200kgf) for the measurement that is pushed and pulled.
- The digital force gauge in the photograph is an optional.

- Combining acceptable model
・MPL series(1KN/2KN)、ARF series(100-200)

Catalog of K-502 series

Main body externals dimensional drawing

Standard issue
Model	K-502E
Size mm(length )	757mm
Weight	About 70ｋｇ
Maximum load capacity	2KN
The maximum stroke	150ｍｍ
Sending pitch	5～50ｍｍ/min

K-503E(electric vertical load measuring stand)

- It is a large-scale, long size product.
- It is a load stand that can be measured up to 5KN(500kgf) for the measurement that is pushed and pulled.

- Combining acceptable model
・MPL series、ARF series(1-5KN)

Main body externals dimensional drawing

Standard issue
Model	K-503E
Size mm(length × side × depth)	793×325×475
Weight	About 80ｋｇ
Maximum load capacity	5KN
The maximum stroke	175ｍｍ
Speed	5～50ｍｍ/min
Size of specimen support	150×110mm

To the head of this page

It makes an effort as brought close to a color as original as possible, and there is an image when it is actual and it differs somewhat from the color.
Please acknowledge it.

There are semi-standardized goods and special goods besides the above-mentioned, too. Please inquire.
Moreover, it will produce if the measuring load, the stroke, and the speed, etc. can be specified and consult, please.