Thư viện video

Các khuôn mẫu

15/06/2017
3.393 lượt xem

video thiết bị tự động hóa

TIN TỨC NỔI BẬT

Hướng dẫn sử dụng máy đo tọa độ

16/06/2017

Vai trò của thiết bị đo lường

16/06/2017

Công ty Tâm Chí tuyển dụng nhân sự

16/06/2017

chia sẻ

Load measurement stand Attonic KS-501H, Attonic KS-501E, Attonic KS-504H

Ngày đăng: 24/58/2020 - 785 lượt xem

Giá: Liên hệ

Xuất xứ:
Tình trạng:
Model:
Bảo hành:

Số lượng:

Mua hàng

Hotline:

Hotline: 0365930441

Mô tả sản phẩm
Thông số kỹ thuật
Chi tiết dòng sản phẩm
Tài liệu kỹ thuật

Load measurement stand that narrows function, and made to low price slimming

KS-501H(manual vertical load measurement stand)

- The load measuring instrument is installed by a vertical desk-top manual operation type, and it uses it for compression and the forced duction test.
- The installation board where the load measuring instrument was installed moves up and down.
- The permissible capacity at rated load center distance is 500N(about 50kgf).
- The width of the main body is 200mm×250mm in depth ×455mm in height.
- Weight is half 9kg compared with our standard load measurement stand "K-501H".
- The lineup to externals 10kN (about 1t) types that can correspond from the resin molding goods to the inspection of metal products is being examined.

Combining acceptable model
・Push-pull tester:
AP series、MP series、MPS series（MPS-500N or less)、MPC series（MPC-500N or less）
・Digital force gauge:
ARF series（ARF-50 or less）

Catalog of KS series

Main body externals dimensional drawing

Specification
Model	KS-501H
Size mm(length × side × depth)	455×200×250
Weight	About 9kg
Permissible capacity at rated load center distance	500N
The maximum stroke	150mm
Sending pitch	2.0mm/1rev.
Main body color	Ivory

KS-501E(electric vertical load measuring stand)

- The load measuring instrument is installed by a vertical desk-top electric operation type, and it uses it for compression and the forced duction test.
- The installation board where the load measuring instrument was installed moves up and down.
- The permissible capacity at rated load center distance is 500N(about 50kgf).
- The width of the main body is 200mm×300mm in depth ×530mm in height.
- Weight is half 13kg compared with our standard load measurement stand "K-501E".

Combining acceptable model
・Push-pull tester:
AP series、MP series、MPS series（MPS-500N or less)、MPC series（MPC-500N or less）
・Digital force gauge:
ARF series（ARF-50 or less）

Catalog of KS series

Specification
Model	KS-501E
Size mm(length × side × depth)	540×225×275 （ include projections）
Weight	About 13kg
Permissible capacity at rated load center distance	500N
The maximum stroke	150mm
Speed	5～200mm/min
Drive system	DC brushless motor
Power-supply voltage	AC100V～240V
Main body color	Ivory

KS-504H(manual vertical load measurement stand)※Special specification

- To reduce the inefficiency of work by the expansion of the deceleration ratio (steering wheel rotation ratio) according to making to a high load, the fast-forwarding mechanism was equipped normally. It is possible to do by the fast-forwarding operation such as return work and positional putting out after it measures it.
- It is the best load stand for compression and the tension test on a simple high load.
- The improvement of externals and the installation part where a load cell on hand and the force gauge cling is also possible.
- Permissible capacity at rated load center distance ･･･ 10KN(1ton)
- Weight ･･･ About 45kg～
- Combining acceptable model
･Push-pull tester: MPL-10KN(Be developing. )
･Digital force gauge: ARF-10KN(Be developing. )

※Special specification

Specification
Model	KS-504H
Size mm(length × side × depth)	690×280×400
Weight	About 45kg
Permissible capacity at rated load center distance	10KＮ
The maximum stroke	250ｍｍ
Sending pitch	0.116ｍｍ/1rev.
Sending pitch（Fast forwarding）	About 0.5mm/1rev.
Main body color	Ivory

※Special specification

Specification
Model	KS-504H
Size mm(length × side × depth)	595×500×540
Weight	About 60kg
Permissible capacity at rated load center distance	10KＮ
The maximum stroke	150ｍｍ
Sending pitch	0.16ｍｍ/1rev.
Sending pitch（Fast forwarding）	About 1.66mm/1rev

It makes an effort as brought close to a color as original as possible, and there is an image when it is actual and it differs somewhat from the color.
Please acknowledge it.

Load measurement stand Attonic KS-501H, Attonic KS-501E, Attonic KS-504H

Mô tả sản phẩm

Thông số kỹ thuật

Chi tiết dòng sản phẩm

Tài liệu kỹ thuật

Các sản phẩm khác

Máy kt lực xiết Digital Torque checker Attonic AD-TM1, AD-TM5, AD-TM10, AD-TM50, AD-TM100, AD-TM200

Digital force gauge Attonic AD-FG1, AD-FG5, AD-FG10, AD-FG50

Máy kt lực xiết Digital Torque checker Attonic ADT-C1, ADT-C2, ADT-C5, ADT-C10, ADT-C20, ADT-C50, ADT-C100, ADT-C200