chia sẻ

Eisen Pin gauge package for calibrating micrometers EMC-1-10, EMC-2- 4, EMC-3

Ngày đăng: 01/07/2020 - 768 lượt xem

Giá: Liên hệ

Xuất xứ:
Tình trạng:
Model:
Bảo hành:

Số lượng:

Mua hàng

Hotline:

Hotline: 0365930441

Mô tả sản phẩm
Thông số kỹ thuật
Chi tiết dòng sản phẩm
Tài liệu kỹ thuật

EMC Series

Pin gauge package for calibrating micrometers

Explanation about series

※The photo shows a package containing EMC-1-10 and EMC-2-4.

This series is used to correct micrometer instrumental errors, spindle screw feed errors (example 1), and the parallelism and plane for each 1/4 rotation of spindles and anvils (example 2). The pin gauges have heat-insulation handles, which prevent body heat from affecting performance and can be used in-house to calibrate micrometers and calipers in order to acquire and maintain ISO-9000 accreditation.

Specifications

Set Rangemm	Length mm	Tolerance	Roundness/Cylindricity	HRC Hardness
2.5～10.0	20	±0.3μm	0.3μm	58 or more
15.0～25.37	20	±0.5μm	0.5μm	58 or more

Details of series

Set No.	Set Rangemm	No.of Pins	Price(Yen)
EMC-1-10	2.50 5.00 5.12 5.25 5.37 5.50 10.00 15.00 20.00 25.00	10	30,000
EMC-2- 4	25.00 25.12 25.25 25.37	4	30,000
EMC-3	2.50 5.00 5.50 6.00 6.50 7.00 10.00 15.00 20.00 25.00	10	35,000

This product comes with measurement data, calibration certificates and traceability system diagrams as standard.

Example

Example 1

Measuring micrometer instrumental errors and spindle screw feed errors.

Micrometer instrumental errors can be corrected by measuring 2.50mm,5.00mm, 10.00mm, 15.00mm, 20.00mm and 25.00mm for comparison with actual measured values.

Example 2

Checking the parallelism and plane for each 1/4 spindle and anvil rotation.