Đầu đo quang học Jenoptik Visionline IPS B10 surface inspection in hydraulic switch blocks

The IPS B10 test sensor gives you a 360° view of a bore hole, ensuring a complete, undistorted view of the internal bore surface of a workpiece. The image sensor automaticallyandvery quicklyidentifies typical flaws such as blowholes, porosities, and scratches in production, for example on main brake cylinders or pistons.

The complete view of the internal surface is made possible by the motion of the test sensor while a CMOS sensor simultaneously and continuously scans the internal surface. The circumference lines in the bore are displayed as circle lines in the image plane of the sensor. The test sensor can be moved very quickly thanks to the high scan rate of the ring sensor. This means very short test cycle times.

The test diameter of the IPS B10 is 14mm to 50mm, and the maximum bore depth is 250mm.

• Test diameter: 14mm - 50mm
• Boredepth: crica 250mm
• Image sensor: CMOS technology
• Object illumination: integrated LED
• Front collision protection: integrated
• Testing time: typically around 10s (main brake cylinder)
• Flaw detection limit: 100μm
• Surfaces: matt to high-gloss and textures surfaces
• Object handling: cyclic testing