XP Series

The XP167 (120V) and XP267 (230V) are UL listed for use in Class I, Division 1 and 2, Group D Hazardous Locations when used with XP-20F Blowers.

The power supplies are equipped with an arc detection cut-off circuit with alarm capability. In the unlikely event that the static eliminator or cable should arc to ground, the arc detection circuit senses the short and shuts down the power supply within 40 milliseconds. The units include relay contacts that can be used to activate a remote visual or audio alarm and to trigger a PLC, for instance, to shut down the line.

The XP Power Supplies can be mounted within the hazardous location.

XPM Series

The XPM167and XPM267 Power Supplies are UL/CUL approved for mounting outside of a hazardous location. The XPM167 has an arc detection circuit to shut down the power supply within 40 milliseconds in the event of an arc from the blower or cable. Includes a monitoring system, when operated with the XP-20F, to detect arcing conditions and short circuit on the ionizing points and the cable. Indicator lamps verify input and output voltage status as well as arc detection. Integrated relay contacts allow for remote monitoring of these features.

Specifications

XP167
Input Requirements	120V, 60 Hz
Output Voltage	7 kV, 3mA max
Number of outputs for static eliminators	4
Max Length of static bars which can be attached	300 inches
Does the unit accept shielded cable	N/A
Acceptable for hazardous locations	Yes
XP267
Input Requirements	230V, 60 Hz
Output Voltage	7 kV, 3mA max
Number of outputs for static eliminators	4
Max Length of static bars which can be attached	300 inches
Does the unit accept shielded cable	N/A
Acceptable for hazardous locations	Yes
XPM167
Input Requirements	120V, 60Hz
Output Voltage	7kV, 3mA max
Number of outputs for static eliminators	4
Max Length of static bars which can be attached	300 inches
Does the unit accept shielded cable	Yes
Acceptable for hazardous locations	No
XPM267
Input Requirements	230V, 60Hz
Output Voltage	7kV, 3mA max
Number of outputs for static eliminators	4
Max Length of static bars which can be attached	300 inches
Does the unit accept shielded cable	Yes
Acceptable for hazardous locations	See Overview
Part Numbers:
XP167	4009088
XP267	4009089
XPM167	4009064
XPM267	4009065