Máy đo tốc độ vòng quay Nidec Shimpo DT-311J NEMA 4X Stroboscope for Harsh, Wet Work Areas

Ngày đăng: 24/48/2023 - 124 lượt xem

Giá: Liên hệ
  • Xuất xứ:
  • Tình trạng:
  • Model:
  • Bảo hành:
Số lượng:

Hotline:

Hotline: 0365930441
Where powerful illumination and rugged speed measuring accuracy is required for the textile industry, the DT-311J will perform where other stroboscopes will not. The DT-311J is used to set injection timing, injection pressure, timing of shedding and weft running time of weaving machinery. Units combine rugged NEMA 4X (IP65) housing with high performance accuracy, special phase shifting, with shock absorbing components and top mounted handle, allows the equipment operator maximum flexibility when setting the timing of weaving machinery.
Features
  • LIMTED RANGE: 200-1,500 RPM/FPM
  • Accepts external trigger input and provides synchronizing pulse output
  • Water & Dustproof housing (IP65)
  • Phase shift for best view and flash photography
  • Hand-held or tripod operation
  • Easy-to-operate controls
  • Easy-to-read LED display
Specifications
Flash Range 200-1,500 FPM
Internal Signal Range 200 to 1,500 FPM
Phase Shift 0° – 359° / 1° increments
Accuracy ±1 digit
Flash Rate/Phase Angle Setter Rotary dial
Display 4 digit, 10mm high Red LED
Divide Ratio 1/1, 1/2, 1/3, 1/4, 2/4 with shift
Input Signal High level: 5-24 V pulse
Low Level: 0-1 V pulse. 2 msec minimum. Impedance less than 10k Ω
Input Impedance 47k
Display Mode Phase shift (degree), Tachometer
Flashtube Xenon lamp, max 10 W at 1,5000 rpm
Flashtube Life 1,200 hours at 1,500 rpm
Power Requirements 115 V or 230 V AC (specify), 50/60 Hz, 30 VA
Power Consumption 20VA max
Operating Temp 32 to 104 °F (0 to 40 °C)
Dimensions 149w x 174h x 214d mm
Weight 4.2 lb (1.9 Kg)
Warranty 2 years
Included Accessories 19.68’ (6m) input/power cable with connector, rubber strobe guard with handle