Là loại máy đo lực điện tử
các model : ZTA-DPU-2N, ZTA-DPU-5N, ZTA-DPU-10N, ZTA-DPU-20N, ZTA-DPU-50N, ZTA-DPU-100N, ZTA-DPU-200N, ZTA-DPU-500N, ZTA-DPU-1000N, ZTA-DPU-5000N, ZTA-DPU-20KN
ZTS-DPU-2N, ZTS-DPU-5N, ZTS-DPU-10N, ZTS-DPU-20N, ZTS-DPU-50N, ZTS-DPU-100N, ZTS-DPU-200N, ZTS-DPU-500N, ZTS-DPU-1000N, ZTS-DPU-5000N, ZTS-DPU-20KN
Hãng sản xuất: IMADA - Japan
Specifications for Separate Sensor Model Digital Force Gauge ZT series
|
Model |
ZTA |
ZTS |
|
Feature |
Advanced model with various functions such as data saving in USB memory stick, displacement I/O and more. |
Standard model with the same benefit in performance as ZTA series but reduced functionality. |
|
Accuracy |
+/-0.2%F.S.+/-1digit |
|
Unit of measurement(*1) |
N, kgf, lbf (*2) |
|
Display |
4-digit Organic EL |
|
Display update |
16 / sec |
|
Sampling rate |
2000 / sec at maximum (*3) |
|
Battery |
8 hours (2 hours charge) |
|
The battery is more consumed when connected to USB memory stick or linear scale. |
|
Safe overload rating |
Approx.200%F.S. |
|
Operating environment |
Temperature: 0 to +40 degree Celsius Humidity: 20 to 80%RH |
|
Function |
Customized display (header and footer), Peak hold (tension and compression), Internal 1000 points data memory,
Comparator (judgment of OK or NG), Reversible display, Sign inversion, Zero clear timer,
+NG alarm, Off timer (auto power off), Dumping, Calendar display, Setting lock |
|
1st/2nd peak, |
– |
|
Displacement detection at force peak, |
|
Displacement 0 reset at selected force |
|
Output |
USB, RS232C, Mitutoyo digimatic (*4), 2 VDC analog output (D/A), |
|
Comparator 3 steps (-NG/OK/+NG) |
|
Sub comparator 2 steps (output of low or high judgment), USB flash drive, Displacement |
– |
|
Overload warning |
Approx.110%F.S. (Warning message and alarm) |
|
External connecting switch |
SEND (a point of contact holding), Zero reset, Peak ON/OFF setting |
|
Weight |
Indicator: Approx.490g (Load cell: Please refer to each load cell specifications) |
|
Dimensions |
Please refer to dimensions. |
|
Accessory |
AC adapter, Inspection certificate, CD driver (including simple software for data log),
Attachments (The set of attachments varies according to range.), USB cable,Carrying case. |
|
Adapter for a USB flash drive(*5) |
– |
*1 These are the specifications for International model. Please note that this unit is different from Japanese domestic model and international one.
*2 [N indication] The indication of 2N and 5N models is mN or N. The indication of 1000N,2500N and 5000N model is N or kN.
[kgf indication] The indication of 2N and 5N models is gf.
[lbf indication] The indication of 2N and 5N models is ozf.
* 3 Up to 100 data/sec. is saved in USB memory (selectable among 1, 50, and 100 /sec)
*4 Not always available for Mitutoyo digimatic products.
*5 USB flash drive is not included.
Model List for Separate Sensor Type Digital Force Gauge ZT series
*This model list is in the case of using DPU series load cell.
|
Model |
Capacity |
Display |
Resolution |
|
ZTA-DPU-2N |
ZTS-DPU-2N |
2N (200gf) |
2.000N(2000mN) |
0.001N(1mN) |
|
ZTA-DPU-5N |
ZTS-DPU-5N |
5N (500gf) |
5.000N(5000mN) |
0.001N(1mN) |
|
ZTA-DPU-10N |
ZTS-DPU-10N |
10N (1kgf) |
10.00N |
0.01N |
|
ZTA-DPU-20N |
ZTS-DPU-20N |
20N (2kgf) |
20.00N |
0.01N |
|
ZTA-DPU-50N |
ZTS-DPU-50N |
50N (5kgf) |
50.00N |
0.01N |
|
ZTA-DPU-100N |
ZTS-DPU-100N |
100N (10kgf) |
100.0N |
0.1N |
|
ZTA-DPU-200N |
ZTS-DPU-200N |
200N (20kgf) |
200.0N |
0.1N |
|
ZTA-DPU-500N |
ZTS-DPU-500N |
500N (50kgf) |
500.0N |
0.1N |
|
ZTA-DPU-1000N |
ZTS-DPU-1000N |
1000N (100kgf) |
1000N(1.000kN) |
1N(0.001kN) |
|
ZTA-DPU-2000N |
ZTS-DPU-2000N |
2000N (200kgf) |
2000N(2.000kN) |
1N(0.001kN) |
|
ZTA-DPU-5000N |
ZTS-DPU-5000N |
5000N (500kgf) |
5000N(5.000kN) |
1N(0.001kN) |
|
ZTA-DPU-10kN |
ZTS-DPU-10kN |
10kN (1000kgf) |
10.00kN |
0.01kN |
|
ZTA-DPU-20kN |
ZTS-DPU-20kN |
20kN (2000kgf) |
20.00kN |
0.01kN |
*These models are only available for combining DPU series load cell and
Sensor Separate Model Digital Force Gauge ZT series.
You can select the load cell from various types. ( See IMADA load cells )
How to Make the Force Gauge Model?
1. Select the force gauge model from ZTS series or ZTA series.
2. Select the using load cell (e.g. LM-100N, SW1-500N etc.).
3. The force gauge model name becomes the combined name of the selected force gauge and the load cell
(e.g. ZTS-LM-100N, ZTA-SW1-500N etc.).