Thư viện video

Các khuôn mẫu

15/06/2017
3.493 lượt xem

video thiết bị tự động hóa

TIN TỨC NỔI BẬT

Hướng dẫn sử dụng máy đo tọa độ

16/06/2017

Vai trò của thiết bị đo lường

16/06/2017

Công ty Tâm Chí tuyển dụng nhân sự

16/06/2017

chia sẻ

Máy đo biên dạng Wilson Piston Profile CV400, CV500

Ngày đăng: 30/32/2023 - 179 lượt xem

Giá: Liên hệ

Xuất xứ:
Tình trạng:
Model:
Bảo hành:

Số lượng:

Mua hàng

Hotline:

Hotline: 0365930441

Mô tả sản phẩm
Thông số kỹ thuật
Chi tiết dòng sản phẩm
Tài liệu kỹ thuật

MEASUREMENT FUNCTIONS

● Piston outer circle: cross-sectional roundness, ellipticity

● Piston pin hole: pin hole roundness, cylindricity

● Piston shape line: longitudinal section shape line

● Piston ring groove, ring groove angle

● Piston profile measurement and elliptic section measurement software package to measure piston section lift, profile curve and ellipticity

● Waviness analysis, spectrum analysis, contour analysis, automatic notch/burr rejection, waveform analysis, and harmonic analysis

● Measurement of roundness, cylindricity, coaxiality, concentricity, runout, parallelism, flatness, and perpendicularity of workpieces

● Piston profile: longitudinal section profile

● Piston ring groove, ring groove angle

● Piston profile measurement and elliptical section measurement software package to measure piston section lift, profile curve and ellipticity

● Waviness analysis, spectrum analysis, contour analysis, automatic notch/burr rejection, waveform analysis, and harmonic analysis

● Measurement of roundness, cylindricity, coaxiality, concentricity, runout, parallelism, flatness, and perpendicularity of workpieces

● Piston pin hole: pin hole roundness, cylindricity

● Piston profile: longitudinal section profile

● Piston ring groove, ring groove angle

● Piston profile measurement and elliptical section measurement software package to measure piston section lift, profile curve and ellipticity

● Waviness analysis, spectrum analysis, contour analysis, automatic notch/burr rejection, waveform analysis, and harmonic analysis

● Measurement of roundness, cylindricity, coaxiality, concentricity, runout, parallelism, flatness, and perpendicularity of workpieces

● Piston profile: longitudinal section profile

● Piston ring groove, ring groove angle

● Piston profile measurement and elliptical section measurement software package to measure piston section lift, profile curve and ellipticity

● Waviness analysis, spectrum analysis, contour analysis, automatic notch/burr rejection, waveform analysis, and harmonic analysis

● Measurement of roundness, cylindricity, coaxiality, concentricity, runout, parallelism, flatness, and perpendicularity of workpieces

MAIN FEATURES

● High-precision rotary table adopts aerostatic bearing structure, the precision is away, no wear and tear, the precision is kept for a long time, and the instrument precision has a long life.

● Data acquisition adopts imported glutinous dense circular grating, with high accuracy and good stability.

● CEL system measurement software based on Chinese version of Windows operating platform, with intuitive and friendly interface, easy operation and rich measurement functions.

● Automatic identification of contour interruption and automatic rejection function

● Floor-mounted table for better stability of measurement

● Process requirements can be set to identify qualified or unqualified; improve the intuitiveness of quality star control

● Single probe to complete piston longitudinal, transverse and ring groove interface shape line measurement

● With powerful analysis functions, such as straightness, cylindricity, corrugation analysis, wave height analysis, and frequency analysis, etc.

● SPC statistical analysis: Statistical analysis of a large amount of measurement data, and give image analysis report, intuitive and clear.

● The computer adopts high quality and high reliability industrial control computer.

PRODUCT PARAMETERS

Item		Product Model
		CV400	CV500
Measuring range	Parts max turning diameter	φ380mm	φ500mm
	Max measuring height	400mm
	Max measuring depth	Use standard probe: 100mm (when the aperture is less than 36mm); non-standard bracket can measure up to 300mm (aperture greater than 36mm, optional)
	Max load capacity	50kg	100kg
Air float main axis	Main axis radial error (H = to the workbench detection height)	±（0.025+5H/10000）μm	±（0.0125+3H/10000）μm
	Main axis axial error (X = distance to spindle center)	±（0.025+6X/10000）μm	±（0.02+4X/10000）μm
Worktable	Table diameter	φ200mm
	Adjust range	Adjust the eccentricity ±2mm; adjust the level ±1°
	Rotate speed	0-12 round/second
Z axis	Straightness (narrow range)	0.5μm/100mm
	Straightness (full range)	0.8μm/400mm
	Grating resolution	0.5μm
Parallelism between rotation axis and Z-axis guide		2μm/400mm(Busbar datum)
Horizontal arm	Movement accuracy	2μm/150mm
	Horizontal travel distance	200mm	270mm
	Grating resolution	0.5μm
Sensor	Measuring range	500μm(radius difference)
	Resolution	0.005μm
	Stylus form	φ2mm ruby probe (φ1mm, φ0.5mm stylus available)
		Measuring force	0.12N
Data Acquisition			14,400 points/week (universal)
Magnification			200,000 times, Automatic
Judging Method			LSC (least squares method), MZC (minimum area method), MIC (maximum inner tangent circle method), MCC (minimum outer circle method)
Filter value			1upr,1-15upr,1-50upr,1-150upr,1-500upr
Data Analytical processing		Spectrum analysis	Analyze the amplitude of different frequency components
		Abnormal data rejection	Manual or automatic rejection of abnormal data, such as burrs, holes and bumps
		Document Management	Automatic saving of measurement data, SQL database
		Results Print	Single or multiple measurement results can be printed on the same page
Installation requirements		Power supply	220-240V , 50HZ, separate ground; maximum power consumption 500W
		Compressed air	Compressed air: air pressure 0.4MP, consumption 0.1m³ /min (air supply 0.6MP, 0.25m³/min or more)
		Environmental requirements	Operating temperature: room temperature Humidity 20-80%RH (no condensation), good ground, no obvious sources of vibration
Weight
Overall size			1000X260X1450mm

Máy đo biên dạng Wilson Piston Profile CV400, CV500

Mô tả sản phẩm

Thông số kỹ thuật

Chi tiết dòng sản phẩm

Tài liệu kỹ thuật

Các sản phẩm khác

Đầu đo cho máy đo biên dạng Cone Probe Chortest ZMY-11, ZMY-9, ZMY-7, ZMY-6, ZMY-5, ZMY-4, ZMY-3, ZMY-2

Đầu đo cho máy đo biên dạng Cut Probe Chortest DQ-30, DQ-50, DQ-40, DQ-20, DQ-16

Máy đo độ tròn Wale Roundness Measuring Instrument CBA15, CBA15-S