Thư viện video

Các khuôn mẫu

15/06/2017
3.216 lượt xem

video thiết bị tự động hóa

TIN TỨC NỔI BẬT

Hướng dẫn sử dụng máy đo tọa độ

16/06/2017

Vai trò của thiết bị đo lường

16/06/2017

Công ty Tâm Chí tuyển dụng nhân sự

16/06/2017

chia sẻ

Load stand Attonic M-501H, Attonic M-501E, Attonic M-502H, Attonic M-502E, Attonic M-505H, Attonic M-505E, Attonic M-507E

Ngày đăng: 24/06/2020 - 574 lượt xem

Giá: Liên hệ

Xuất xứ:
Tình trạng:
Model:
Bảo hành:

Số lượng:

Mua hàng

Hotline:

Hotline: 0365930441

Mô tả sản phẩm
Thông số kỹ thuật
Chi tiết dòng sản phẩm
Tài liệu kỹ thuật

It is possible to move in the column bar, and the work set is smooth.

M-501H(manual vertical load measuring stand)

- It is a medium load measuring stand.
- It is push-pull load measuring stand up to 500N (50kg).
- The column bar (installation parts such as sensors and measuring instruments) can be freely moved within the range of the stroke , and it can correspond to wide measurement and inspection.

- Combining acceptable model
･Push-pull tester:AP series、MP series、MPS series（MPS-500N or less)、MPC series（MPC-500N or less）
・Digital force gauge:
ARF series（ARF-50 or less）

With reversible mechanism type
Model	M-501HS
Size mm(length × side × depth)	900(1050)×250(380)×360
Weight	About 33ｋｇ
Maximum load capacity	500N
The maximum stroke	150ｍｍ
Sending pitch	2.0ｍｍ/1rev.

Main body externals dimensional drawing

Without reversible mechanism type
Model	M-501HN
Size mm(length × side × depth)	900(1050)×250(380)×360
Weight	About 33ｋｇ
Maximum load capacity	500N
The maximum stroke	150ｍｍ
Sending pitch	2.0ｍｍ/1rev.

Main body externals dimensional drawing

M-501E(electric vertical load measuring stand)

- It is a medium load measuring stand.
- It is push-pull load measuring stand up to 500N (50kg).
- The column bar (installation parts such as sensors and measuring instruments) can be freely moved within the range of the stroke , and it can correspond to wide measurement and inspection.
- Movement at maximum speed is enabled by pushing “high speed button” while operating, and repeated operation is improved.

- Combining acceptable model
･Push-pull tester:AP series、MP series、MPS series（MPS-500N or less)、MPC series（MPC-500N or less）
・Digital force gauge:
ARF series（ARF-50 or less）

With reversible mechanism type
Model	M-501E1S
Size mm(length×side×depth)	900(1050)×250×360
Weight	About 35ｋｇ
Maximum load capacity	500N
The maximum stroke	150ｍｍ
Sending pitch	5～100mm/min

Main body externals dimensional drawing

Without reversible mechanism type
Model	M-501E1N
Size mm(length×side×depth)	900(1050)×250×360
Weight	About 35ｋｇ
Maximum load capacity	500N
The maximum stroke	150ｍｍ
Sending pitch	5～100mm/min

Main body externals dimensional drawing

To the head of this page

M-502H(manual vertical load measuring stand)

- It is a load stand that can be measured up to2KN(200kgf)for the measurement that is pushed and pulled.
- Because the column (pillar) is composed of two (the operation column and the support column), a steady measurement can be done.
- It is possible to move in the column bar, and the work set is smooth.
- New establishment of a high-speed button ･･･ It is possible to move at maximum speed while moving up and down.
- A push-pull tester in the photograph is another sales.

- Combining acceptable model
･Push-pull tester:MPL series
・Digital force gauge:ARF series（1KN-2KN）

With reversible mechanism type
Model	M-502HS
Size mm(length×side×depth)	1080×320(485)×400
Weight	About 98ｋｇ
Maximum load capacity	2KN
The maximum stroke	100ｍｍ
Sending pitch	0.5ｍｍ/1rev.
Column bar stroke	200mm
Driving screw	P=5mm
Size of resisting pressure version	250×190mm

Without reversible mechanism type
Model	M-502HN
Size mm(length×side×depth)	1080×320(485)×400
Weight	About 98ｋｇ
Maximum load capacity	2KN
The maximum stroke	100ｍｍ
Sending pitch	0.5ｍｍ/1rev.
Column bar stroke	200mm
Driving screw	P=5mm
Size of resisting pressure version	250×190mm

M-502E(electric vertical load measuring stand)

- It is a load stand that can be measured up to2KN(200kgf)for the measurement that is pushed and pulled.
- Because the column (pillar) is composed of two (the operation column and the support column), a steady measurement can be done.
- It is possible to move in the column bar, and the work set is smooth.
- New establishment of a high-speed button ･･･ It is possible to move at maximum speed while moving up and down.

- Combining acceptable model
･Push-pull tester:MPL series
・Digital force gauge:ARF series（1KN-2KN）

With reversible mechanism type
Model	M-502E1S
Size mm(length×side×depth)	1080×320×400
Weight	About 118ｋｇ
Maximum load capacity	2KN
The maximum stroke	100ｍｍ
Sending pitch	5～50mm/min
Column bar stroke	200mm
Driving screw	P=5mm
Size of resisting pressure version	250×190mm
Power supply	AC100V　5A

Without reversible mechanism type
Model	M-502E1N
Size mm(length×side×depth)	1080×320×400
Weight	About 118ｋｇ
Maximum load capacity	2KN
The maximum stroke	100ｍｍ
Sending pitch	5～50mm/min
Column bar stroke	200mm
Driving screw	P=5mm
Size of resisting pressure version	250×190mm
Power supply	AC100V　5A

To the head of this page

M-505H(manual horizontal load measuring stand)

It is small, light body and low price.
The height of the table was lowered, and long-time measurement was enabled at the desk-top.
It is push-pull load measuring stand up to 500N (50kg).

- Combining acceptable model
･Push-pull tester:AP series、MP series、MPS series（MPS-500N or less)、MPC series（MPC-500N or less）
・Digital force gauge:
ARF series（ARF-50 or less）

With reversible mechanism type
Model	M-505HS
Size mm(length ×side×depth)	260×750×325
Weight
Maximum load capacity	500N
The maximum stroke	１00ｍｍ
Sending pitch	2.0ｍｍ/1rev.

Without reversible mechanism type
Model	M-505HN
Size mm(length ×side×depth)	260×750×325
Weight
Maximum load capacity	500N
The maximum stroke	１00ｍｍ
Sending pitch	2.0ｍｍ/1rev.

M-505E(electric horizontal load measuring stand)

	It is small, light-weight and low price in the field of Motorized type. Movement at maximum speed is enabled by pushing “high speed button” while operating, and repeated operation is improved. It is push-pull load measuring stand up to 500N (50kg). - Combining acceptable model ･Push-pull tester:AP series、MP series、MPS series（MPS-500N or less)、MPC series（MPC-500N or less）・Digital force gauge: ARF series（ARF-50 or less）

With reversible mechanism type
Model	M-505E1S
Size mm(length×side×depth)	225×750×26０
Weight	About 35ｋｇ
Maximum load capacity	500N
The maximum stroke	１00ｍｍ
Sending pitch	5～100mm/min

Without reversible mechanism type
Model	M-505E1N
Size mm(length×side×depth)	225×750×260
Weight	About 35ｋｇ
Maximum load capacity	500N
The maximum stroke	１00ｍｍ
Sending pitch	5～100mm/min

To the head of this page


M-507E(electric horizontal load measuring stand)

	- It is a load stand that can be measured up to 5KN(500kgf)for the measurement that is pushed and pulled. - A dispersion prevention cover and a push-pull tester in the photograph are another sales. - Combining acceptable model ･Push-pull tester:MPL series ・Digital force gauge:ARF series（1KN-5KN）

It makes an effort as brought close to a color as original as possible, and there is an image when it is actual and it differs somewhat from the color.
Please acknowledge it.