Haimer 3D-Digital Sensor model 80.464.40.FHN

Ngày đăng: 17/43/2022 - 182 lượt xem

Giá: Liên hệ
  • Xuất xứ:
  • Tình trạng:
  • Model:
  • Bảo hành:
Số lượng:


Hotline: 0365930441

3D-Sensor Digital with integrated adapter


The Digital 3D-Sensor with an integrated taper is a further development of the time proven mechanical 3D-Sensor. It serves for approaching workpiece edges on milling and EDM machines. The integrated adapter ensures straightforward handling: Adapter and 3D-Sensor form a unity.

The spindle may be positioned quickly and safely on the references edge. The approaching operation can be exactly monitored on the digital display. The zero points can be set without any calculations because the spindle axis is positioned exactly on the approached edge.

The digital display has large numbers that measure in increments of 0.001 mm. It can be easily read from a long distance (i.e. when mounted on a large machining center). The digital display is water- and dust-proofed according to IP 64 and can be stored in the tool magazine of the machine.

Please take note: The given measuring precision of 0.01 mm only applies, if the original HAIMER probe tips are used.

Included in delivery: 3D-Sensor Digital with integrated adapter, short probe tip Ø 4 mm

Technical data subject to change without prior notice.

Probe tips

Probe tips

The sensors can be equipped with a short (ball Ø 4 mm) and a long (ball Ø 8 mm) probe tip. The probe tips may be changed without any tool, no re-calibration of the unit is needed.
The probe tips of course are compatible to all HAIMER 3D-Sensors.


Technical drawing

Measuring Instrument 3D-Sensor Digital with integrated adapter Technical Drawing

Technical Data

3D-Sensor Digital with adapter SK40
A [mm] 138,6
Ø D [mm] 4
B [mm] 65
Smallest unit of measure [mm] 0,001
Repeatability [mm] 0,001
Measuring accuracy [mm] 0,005
Display mode inch / metric
Display size [mm] 45 x 23
Height of numbers [mm] 8,5
Service life of battery approx. (continuos operation) [hrs] 3000
Order No.