|
Wiring method |
2 wire (RCB,RDB), 3 wire (RNB,RNBE,RPB,RPBE) |
|
Switching logic |
SPST normally open (RCB), Solid state output,normally open (RDB,RNB,RNBE,RPB,RPBE) |
|
Switch type |
Reed switch (RCB), Without contact (RCB), NPN current sinking (RNB,RNBE),PNP current sinking (RPB,RPBE) |
|
Operating voltage |
5~240V DC/AC (RCB), 5~30V DC (RDB,RNB,RNBE,RPB,RPBE) |
|
Switching current |
100mA max. (RCB), 50mA max. (RDB), 200mA max. (RNB,RNBE,RPB,RPBE) |
|
Switch range |
10W max. (RCB), 1.5W max. (RDB), 6W max.(RNB,RNBE,RPB,RPBE) (※1) |
|
Current consumption |
22mA@24V DC max. (RNB), 6mA@24V DC max. (RNBE,RPBE), 20mA@24V DC max. (RPB) |
|
Voltage drop |
3.5V max. (RCB), 3.7V max. (RDB), 0.5V max. (RNB,RNBE,RPB,RPBE) |
|
Leakage current |
0.1mA max. (RDB), 0.01mA max. (RNB,RNBE,RPB,RPBE) |
|
Indicator |
Red LED (RCB,RNB,RNBE), Green LED (RDB,RPB,RPBE) |
|
Cable |
φ3.3,2C,PVC (RCB,RDB); φ3.3,3C,PVC (RNB,RNBE,RPB,RPBE) |
|
Temperature |
－10~+70℃ (No freezing) |
|
Shock |
30G(RCB), 50G(RDB,RNB,RNBE,RPB,RPBE) (※2) |
|
Vibration |
9G (※3) |
|
Enclosure classification |
IEC 60529 IP67 |
|
Protection circuit |
1 (RCB), 3, 4 (RDB, RNB, RNBE, RPB, RPBE) (※4) |
|
Weight |
33 g (2m cable) |
|
Remark |
※1. Warning: Never exceed rating (watt=voltage×amperage). Permanent damage to sensor will occur.
※2. Sin wave / X.Y.Z. 3 directions / 3 times each direction / 11ms each time.
※3. Double amplitude 1.5mm / 10Hz~55Hz~10Hz(Sweep 1min) / X.Y.Z. 3 directions / 1 hour each time.
※4. 1=None / 2=Short-circuit / 3=Power source reverse polarity / 4=Surge suppression. |