Bộ đếm Magnescale Counter LT10A-105, LT10A-105B, LT10A-105C, LT10A-205, LT10A-205B, LT10A-205C

Ngày đăng: 14/23/2019 - 102 lượt xem

Giá: Liên hệ
  • Xuất xứ:
  • Tình trạng:
  • Model:
  • Bảo hành:
Số lượng:

Hotline:

Hotline: 0365930441

Features

Compact, lightweight, and easy-to-mount counter.

  • Compact size : DIN standard (72 mm x 72 mm / 2.83" x 2.83" W x H)
  • Resolution : 5,10 μm Selectable
  • Suitable for panel mounting
  • Direct interfacing from display unit to PLC or computer
  • Current values, maximum, minimum, peak-to-peak values and GO/NO GO evaluation included as standard functions.
  • ADD/SUB function (2-channel model)
  • Full lineup for various applications

Specifications

Specifications

*1 I/O connector Input : Reset, peak-hold start, peak-hold pause, RS trigger (RS-232C models only) Output : Result evaluation (photocoupler)

*2 BCD (36 pin half-pitch connector) Input : Reset, peak-hold start, comparator value selection (4 settings) Output : five digits (open collector)One of current value/maximum value/minimum value/peak-to-peakvalue selected and output. Alerm output

*3 RS-232C (8 pin mini-DIN connector) Reset, preset value setting/recall, peak-hold start, peak-hold pause

*4 RS-TRG pin Trigger input for RS-232C data output

*5 With measuring unit connected.

Magnescale reserves the right to change product specifications without prior notice.

Model LT10A-105 LT10A-105B LT10A-105C LT10A-205 LT10A-205B LT10A-205C
Display 6 digit backlit LCD, mode display
I/O Measuring unit input 1 CH 2 CH
I/O connectors*1
BCD*2 - - - -
RS-232C*3 - - - -
RS-TRG*4 - - - -
Reset function Reset key or external input (I/O connectors)
- BCD terminal RS-232C command - BCD terminal RS-232C command
Preset function Preset value set with preset key, recalled with reset key.
- Recalled with BCD reset terminal Set or recalled with RS-232C command - Recalled with BCD reset terminal Set or recalled with RS-232C command
Conparetor function Three-level comparator Comparator value set with keys on the front panel. Result evaluation: LED and I/O connector output (photocoupler)
- Up to 4 values can be set for comparator (key input). Switched with BCD terminal. Set with RS-232C command - Up to 4 values can be set for comparator (key input). Switched with BCD terminal. Set with RS-232C command
ピークHold function Maximum, minimum, and peak-to-peak values. Measuring started by the start input of the I/O connector; update stop by pause input.
- - RS-232C can set or start. - - RS-232C can set or start.
Resolution 0.005 mm, 0.01 mmselectable
Direction Can be switched
Reference point function Function use enabled/disabled can be selected (if use is enabled, the unit enters reference point signal input wait status at the same time as power-on).
Maximum response speed 100 m/min 100 m/min
Addition and subtraction function - A+B, A-B, B-A can be set with the direction setting.
Alarm Speed over or measuring unit cable disconnected (Displayed on LCD or the I/O connector’s comparator outputs are all “H” (OFF).)
- BCD alarm terminal "H" (OFF) - - BCD alarm terminal "H" (OFF) -
Data storage Resolution, direction, comparator value, preset value, modes, etc.
- BCD sign Data signalling rate, etc. - BCD sign Data signalling rate, etc.
key lock function key lock and release.
Temperature Operating:0~40℃, Storage:-10~50℃
Power consumption*5 1.8W 2.9W 2.0W 2.3W 4.0W 2.5W
Mass Approx. 200 g Approx. 230 g Approx. 220 g Approx. 210 g Approx. 270 g Approx. 230 g
Power supply Power input connector (3 pins) : DC9.0-26.4 V
Compatible measuring unit DT12/32series