Bộ chuyển dữ liệu Magnescale Interface MG50-EC, MG50-CL, MG51, MF10-P1, MF10-P2, MF10-CM

Ngày đăng: 14/54/2019 - 170 lượt xem

Giá: Liên hệ
  • Xuất xứ:
  • Tình trạng:
  • Model:
  • Bảo hành:
Số lượng:

Hotline:

Hotline: 0365930441

Features

Interface unit for Tough Sensor series. Output data from DF805/812 series can be calculated and controlled by PLC via EtherCAT/CC-Link fieldbus. DT series(general purpose type) can be connected by using MT20 series interpolator.

  • MG50-EC (EtherCAT) / MG50-CL (CC-Link)
    • Fieldbus compatible main module interface unit. Maximum of 30 gauges can be connected to MG50-EC (maximum of 16 gauges for MG50-CL).
  • MG51
    • Distribution module for MG50. When installing digital gauges over a long distance, extension cables aren't required when using a MG51. Ten gauges can be connected per unit. Maximum cable length is 30m.
  • MF10-CM
    • Counter module for DF805S/812S series. MF10-CM is compatible with the MG50/51 series.

Specifications

MG50 series Specifications

Magnescale reserves the right to change product specifications without prior notice.

Model name Main module Distribution module
MG50-EC MG50-CL MG51
Commnication protocol EtherCAT CC-Link Data transferred to main module by dedicated protocol
Baud rate 100Mbps Maximum downlink speed of 10 Mbps -
Node address setting method Set with decimal rotary switches or software Set with decimal rotary switches -
Node address range 000-192 Max. 64 -
Maximum connectable counter modules 30 16 10
Maximum connectable distribution modules 8 -
Maximum cable length Maximum cable length between main module and distribution module: 30m
Mounting method 35mm DIN rail mounting
Power supply voltage DC24V(20.4-26.4V)
Power consumption / Consumption current / Current consumption 2.4 W or less 100 mA or less 2W or less 80 mA or less
MF10 series Specifications

Magnescale reserves the right to change product specifications without prior notice.

Model name Digital tolerance indicator Counter module
MF10-P1 MF10-P2 MF10-CM
Function NPN output (current sink) PNP output (current source) Counter module for MG50
I/O Number of Go/No Go judgement output 2, Number of external inputs 1 -
Minimum display unit 0.1μm
Cable length input/output, power cable 2m -
Mounting method 35mm DIN rail mounting
Power supply voltage +10-30V DC including ripple (p-p) 10%
Power consumption / Consumption current 2.1W or less / 85A or less
Mass 75g