Quạt thôi ion Fan type ionizer Kasuga IOH-02/IOH-03

Ngày đăng: 22/24/2020 - 344 lượt xem

Giá: Liên hệ
  • Xuất xứ:
  • Tình trạng:
  • Model:
  • Bảo hành:
Số lượng:


Hotline: 0365930441


  • Control by the new D.I.C. circuit* not only maintains a certain ion balance but also ensures a consistent amount of ion generation. This allows ionization in the optimal condition at all times, with no degradation of ionization performance. Frequency of maintenance can thus be significantly reduced.
  • The rear fan guard can easily be removed just by sliding it, which allows easy access to the area around the electrodes, ensuring easy maintenance.
  • When the ionizer is turned on, it displays the remaining interval before the next maintenance.
  • Electrode needles made of a special alloy with low dust emission allow use of the unit in a clean-room environment.


When the unit is turned on, it displays the remaining interval before the next maintenance by the number of LED lamps lit.

*The D.I.C. (Double Ion Control) circuit maintains the optimal condition for static elimination by simultaneously controlling the ion balance and amount of ion generation.


Model IOH-03  IOH-02
Ion generation method DC corona discharge
Discharging electrode needle Special alloy with low dust emission
Method of ion balance control Control by D.I.C. circuit
Ion balance* Within ±10V (at time of factory shipment), permits fine tuning
Fan speed Variable (non-step)
Maximum air volume 3.0 m3/min × 3 fans or 2 fans
Maximum airflow speed* 0.87m/sec 0.70m/sec
Alarm display Alarm lamp blinking Cleaning alarm (control limit), high-voltage alarm
Alarm lamp staying lit High-voltage stop (when voltage exceeds the control range or the high-voltage alarm continues)
Alarm output
(External output)
ionization output During ionization (high-voltage output)
Alarm output While alarm lamp blinks or stays lit
External input Permits feedback input of electrostatic potential or ion balance
Amount of ozone production* 0.02 ppm or less
Operating environment Temperature: 0°C-40°C, Humidity: 80% RH or below (no condensation)
Input condition AC100-240V (permits series connection of up to 10 units)
Power cable Approx. 1.8 m (power cable with grounding electrode)
Power consumption 54VA 32VA
Mass Approx. 5.0kg Approx. 3.6kg

*Measurement distance450mm

Ionization performance


Dimensions [mm] and names of parts