KINH HIỂN VI CÔNG CỤ SUNPOC SPTM-13B Digital Universal Toolmaker's Microscope

Ngày đăng: 06/53/2022 - 172 lượt xem

Giá: Liên hệ
  • Xuất xứ:
  • Tình trạng:
  • Model:
  • Bảo hành:
Số lượng:

Hotline:

Hotline: 0365930441
SPTM-13B Digital Universal Toolmaker's Microscope

Features:
The master microscope is equipped with multiple eyepieces and objectives, with large view field and sharp imaging; The photoelectric and digital technology is adopted, taking the precision grating scale as sensory element, with high accuracy of measurement; Advanced computer processing technology is adopted to input collected real-time signals in the grating and video data system into the computer; which were processed by the powerful 2-coordinate measuring software, this instrument can effectively fulfill all kinds of complicated measuring work; The master microscope can out-beat left and right, suitable for the measurement of helical parts; The transmission and indirect lighting can measure profile and the surface sizes; High-speed movement and vernier arrangement are installed and can be switched over speedily; Multiple accessories of tailstock, V-type support, height-measuring device, etc. are equipped, with wide-range uses.
Universal Toolmaker's Microscope can measure:
-Measuring the intermediate, coarse and minor-diameter, pitch, tooth-form semi-angle of the external screw-thread for screw-threads, leading screws, worms, etc.;
-Measuring the lead, saw-shaped angle and tooth profile angle of the gear hobber;
-Measuring the figure and location errors of the position degree on the circuit board, on drill jig, or on aperture plate and those of the symmetry on the keyslot, etc.
Measuring various forms of shaped parts, e.g., sample plates, form turning tool, form cutter, punching die, cam, etc.;
 
Technical parameters:
Model SPTM-13B
Range of X-coordinate (mm)      200mm
Range of Y-coordinate (mm) 100mm
Resolution: 0.0002 (mm)
Worktable area (mm) 260x270mm
Accuracy of the instrument: (1+L/100)μm,
Angle tilting range:  ±12°      
Maximum diameter gripped by the tailstock:  φ100 mm
Maximum length gripped by the tailstock:  700 mm
Transmission lighting: 24V  150W Halogen tungsten lamp
Reflecting lighting: 24V  150W Halogen tungsten lamp
Overall sizes of the instrument (mm):   1300×1250×800
Mainframe weight: 450 kg
 
Objective:
Objective magnification Total magnification working distance  (mm) Object field     (mm)
1X 10X 79 20
3X 30X 69 6.7
5X 50X 49 4
 
Digital display index head
Angle measuring range: 0o~360o
Resolution ratio of the angle measuring: 5″
Accuracy of the angle measuring: 30″

 
Optical position indicator
Minimum detection aperture: φ5 mm
Maximum detection depth: 15mm            Metering force: 0.1N
Locating stability: 0.001mm
Limit error gauged for head diameter: 0.0005mm
Maximum load of the instrument:  40kg
Overall size of the principal machine of the instrument:  (L×B×H) = 1300×1250×800
Weight of the principal machine of the instrument:  450kg
Ambient environment of the instrument service:
Room temperature: 20±1°
Relative humidity: Not more than 60%
CD of 2-D imeasuring software
1. Acquisition functions: Acquire dots, lines, circulars and arcs
2. Construction functions: Construct the dots acquired to form the straight line, the circular and the arc
3. Combined computing functions: 
The combination calculation between “dot” and “dot” gives their dot distance and midpoint coordinate;
The combination calculation between “dot and line” gives their dot line distance;
The combination calculation between “straight line and straight line for their crossing” gives their intersecting point coordinate and their included angle;
The combination calculation between “straight line and straight line for their centering” gives the central line information for the two lines;
The combination calculation between “circular and circular” gives the information of the crossing points and the center distance of the circulars; and
The combination calculation between “circular and straight” gives the information of their crossing points and the distance from the center of the circular to the line.
4. Functions for the treatment of the shape and location tolerance: 
Measurement of the roundness between circular and arc;
Measurement of linearity;
Measurement of axiality;
Measurement of symmetry; and
Measurement of location.
5. Exchange of the coordinate system:
    The coordinate transition between the rectangular coordinate and the pole coordinate
    Establish the new coordinate and set the coordinate straight
6. Data output: Outputting to AUTOCAD, EXCEL AND WORD to conduct further data processing.